Anyone willing to assist??

This is a general discussion. If your topic doesn't fit anywhere else, put it here.
pattimelt
Regular Guest
Regular Guest
Posts: 107
Joined: Sun Sep 02, 2007 2:00 pm

Re: Anyone willing to assist??

Post by pattimelt » Wed Feb 13, 2008 1:35 pm

GuestJockey wrote:Haha - I'm in about the same place as you. The STORM DRAINS are SO HARD!!! Did you notice there are a few repeat pictures? (hope so, otherwise I just gave about 5 away). I've got the packet in color - I'll try to scan a few tomorrow.
Didn't have ANY problems finding the SQUARE drain.. the round one, now, that's another story!!!

You MIGHT just want to look in front of the Photo Shop at the curb.... :D:

And a couple you think are doubles are NOT... that clock one that you think is a double?? NOT!!!



GuestJockey
Regular Guest
Regular Guest
Posts: 223
Joined: Fri Nov 30, 2007 12:48 pm

Re: Anyone willing to assist??

Post by GuestJockey » Wed Feb 13, 2008 3:24 pm

pattimelt wrote:Didn't have ANY problems finding the SQUARE drain.. the round one, now, that's another story!!!

You MIGHT just want to look in front of the Photo Shop at the curb.... :D:

And a couple you think are doubles are NOT... that clock one that you think is a double?? NOT!!!
THANKS! I know about the clock, I meant more about the lions - the time stamp on the photo is even the same! lol



Randy B
In our Memory
In our Memory
Posts: 936
Joined: Fri Aug 10, 2007 3:42 am
Location: Champaign, IL

Re: Anyone willing to assist??

Post by Randy B » Thu Feb 14, 2008 12:49 am

pattimelt wrote: I have decided though, that the regular wheelchairs need cupholders!!! :D:
You KNOW I couldn't let this pass without my inventive side taking over. I have seen cup holders in lawn and garden shops (or depts) that clip onto the tubular frame of lawn furniture. Something like this could potentially clip to the front of the arm rest support frame. And if the clip is not strong enough for the "super gigantic gulp" you can add some cable ties to reinforce the clip (but be sure to bring a small pair of wire cutters to remove it at the end of the day).

Or if you want to make your own. Buy one of the big plastic souvenier tubs of popcorn, drill two holes and attach two "broom rack" clips (available at many hardware stores). Actually if you get two you could use one for a drink, and one for a tub of popcorn. :D:

Randy



GRUMPY PIRATE
Permanent Fixture
Permanent Fixture
Posts: 8780
Joined: Thu Aug 30, 2007 11:23 am
Location: Insane Diego

Re: Anyone willing to assist??

Post by GRUMPY PIRATE » Thu Feb 14, 2008 1:01 am

Randy B wrote:You KNOW I couldn't let this pass without my inventive side taking over. I have seen cup holders in lawn and garden shops (or depts) that clip onto the tubular frame of lawn furniture. Something like this could potentially clip to the front of the arm rest support frame. And if the clip is not strong enough for the "super gigantic gulp" you can add some cable ties to reinforce the clip (but be sure to bring a small pair of wire cutters to remove it at the end of the day).

Or if you want to make your own. Buy one of the big plastic souvenier tubs of popcorn, drill two holes and attach two "broom rack" clips (available at many hardware stores). Actually if you get two you could use one for a drink, and one for a tub of popcorn. :D:

Randy
When I was outfitting our vehicles with GPS and other devices, I found this stuff.

http://www.ram-mount.com/

With the componets, you can create just about anything. They have all sorts of gymbaled cup holders, and quick release clamps!

Downside: kind of pricey!!


:pirateflaARRRRRRR YA DOIN'?

mechurchlady
Should be on Payroll
Should be on Payroll
Posts: 3419
Joined: Fri Aug 04, 2006 3:00 pm
Location: 80 year old shack

Re: Anyone willing to assist??

Post by mechurchlady » Thu Feb 14, 2008 5:41 am

I am eagerly awaiting to help


Image

Mad Maxx
Repeat Traveler
Repeat Traveler
Posts: 59
Joined: Thu Nov 29, 2007 11:40 am

Re: Anyone willing to assist??

Post by Mad Maxx » Thu Feb 14, 2008 10:49 pm

Ok, where are the scans to let me help? Or am I going to have to go over to the GSB tomorrow and figure out how to get in there to bug you in person?



pattimelt
Regular Guest
Regular Guest
Posts: 107
Joined: Sun Sep 02, 2007 2:00 pm

Re: Anyone willing to assist??

Post by pattimelt » Fri Feb 15, 2008 7:06 am

Mad Maxx wrote:Ok, where are the scans to let me help? Or am I going to have to go over to the GSB tomorrow and figure out how to get in there to bug you in person?
One of my fellow team members has the paperwork and he "forgot" to bring it in to me yesterday, so he's supposed to bring it today.



Princess Susi
Practically Lives Here
Practically Lives Here
Posts: 2317
Joined: Mon Dec 11, 2006 2:00 pm

Re: Anyone willing to assist??

Post by Princess Susi » Fri Feb 15, 2008 7:44 am

pattimelt wrote:Will scan tonight. I have copies in black and white, and they just don't DO it, if you catch my drift.

I started off alone and went and spent a few hours in the park yesterday until one of my other team members could show up and together we found about 40 of the 98 that we had to find. They did find some awfully obscure things to take pictures of, I can tell you that much!! I figure I'll go and spend some more time at the park today and see if I can't find more. I'm sort of limited right now since I sprained my ankle, and they don't want me to walk too much. Cruising the parks in a wheelchair ain't all it's cracked up to be, especially when you have to shove yourself, hold on to your purse, hold the scavenger hunt sheets AND look for everything!! I have decided though, that the regular wheelchairs need cupholders!!! :D:
Tell them your ideas for the wheelchair! They sound good! Coming from a CM they may take your ideas to heart! We need cup holders. You are right! Wheeling round the Parks is a little difficult. Those chairs ain't the sturdiest of things! :eek:

Hope to see the scans soon! I hope I can help...on the spot... eek...want pattimelt to win...


[SIGPIC][/SIGPIC] Hugging a Beluga is swell!

Big Wallaby
Permanent Fixture
Permanent Fixture
Posts: 5734
Joined: Thu Feb 15, 2007 7:19 pm
Location: Vancouver, Washington

Re: Anyone willing to assist??

Post by Big Wallaby » Fri Feb 15, 2008 5:41 pm

That cupholders idea is both brilliant and scary at the same time. However, I think "brilliant" wins out.


My opinions are mine and mine only. If my opinions are the opinion of others who happen to share whatever my crazy views may be, then fine, but it's not because I represent them in having my opinions. Got it?

February
Practically Lives Here
Practically Lives Here
Posts: 1228
Joined: Tue Oct 09, 2007 9:40 am

Re: Anyone willing to assist??

Post by February » Fri Feb 15, 2008 7:38 pm

Big Wallaby wrote:That cupholders idea is both brilliant and scary at the same time. However, I think "brilliant" wins out.
Yes, it is!

My daughter did, in the past, once use my forearm crutch as a cup holder.

Smart little stinker. I wondered suddenly as I was holding it in my lap in the chair why it was getting so heavy LOL that reminds me, sheesh I have to get on ordering one of those crutch holders before our trip! ACK!



Two things stand like stone:
Kindness in another’s trouble.
Courage in your own.
~Adam Lindsay Gordon

"...and only fireworks will light the sky at night
for all the world can see." ~Keane

Post Reply