Who Knew ¾th of an Inch Could Be So Problematic?!
-
- Seasoned Pro
- Posts: 824
- Joined: Sat Nov 17, 2007 5:26 pm
- Location: Orlando, Fla.
Who Knew ¾th of an Inch Could Be So Problematic?!
As you may or may not know, I'm a Canadian living in the US.
With that comes certain duties that need to be undertaken every so often. Voting in Federal Elections by mail. Lashing out at friends and neighbours after certain Olympic embarassments (don't get me started :p :) . And really importantly, maintaining a proper Passport.
That's what's been causing me so much headache recently. Time has come for me to apply for a new Canadian Passport. There are certain things that are different about this process compared to applying for an American Passport.
You have to have a guarantor to vouch for your identity. Barring that, you have to drag your entire application over to a Notary Public.
You have to submit references.
And most differently, the picture sizes are different. U.S. Passport Photos are 2 in. by 2 in.. Canadian Photos are 50 mm. by 70 mm., or 2 in. by 2¾ in.. On top of that, it has to be a professional portrait (no taking one in your bathroom) and the photographer has to put their contact information on the back (hence why it's taller).
This has been the procedure for years, and if I were in Canada, would be taken care of in a relative heartbeat.
That's the problem. I'm not.
I've been driving across Central Florida like a madman trying to find someone willing to do this for me. Place after place, people seem to be adverse to the idea of leaving ¾ths of an inch on the photo. I broach the subject, and they seem to freeze up and give me this look like I have two heads. Indeed, one lovely man out in Altamonte Springs barely let me get the words 'Canadian' and 'Passport' out before saying no.
Ugh! :mad:
With that comes certain duties that need to be undertaken every so often. Voting in Federal Elections by mail. Lashing out at friends and neighbours after certain Olympic embarassments (don't get me started :p :) . And really importantly, maintaining a proper Passport.
That's what's been causing me so much headache recently. Time has come for me to apply for a new Canadian Passport. There are certain things that are different about this process compared to applying for an American Passport.
You have to have a guarantor to vouch for your identity. Barring that, you have to drag your entire application over to a Notary Public.
You have to submit references.
And most differently, the picture sizes are different. U.S. Passport Photos are 2 in. by 2 in.. Canadian Photos are 50 mm. by 70 mm., or 2 in. by 2¾ in.. On top of that, it has to be a professional portrait (no taking one in your bathroom) and the photographer has to put their contact information on the back (hence why it's taller).
This has been the procedure for years, and if I were in Canada, would be taken care of in a relative heartbeat.
That's the problem. I'm not.
I've been driving across Central Florida like a madman trying to find someone willing to do this for me. Place after place, people seem to be adverse to the idea of leaving ¾ths of an inch on the photo. I broach the subject, and they seem to freeze up and give me this look like I have two heads. Indeed, one lovely man out in Altamonte Springs barely let me get the words 'Canadian' and 'Passport' out before saying no.
Ugh! :mad:
- BRWombat
- Permanent Fixture
- Posts: 5131
- Joined: Thu Jul 22, 2004 2:00 pm
- Department: Offsite Harmony
- Position: Back Row Baritone
- Location: Dallas area
- Contact:
Re: Who Knew ¾th of an Inch Could Be So Problematic?!
You're lucky. Down in the Miami area, with all the guns, say the word "millimeter" out loud and you'll probably find yourself in a shootout. 

"This would be a great place if we could only get rid of all these people." - Walt Disney

VocalMajority Twitter
VocalMajority Twitter
-
- Permanent Fixture
- Posts: 8780
- Joined: Thu Aug 30, 2007 11:23 am
- Location: Insane Diego
Re: Who Knew ¾th of an Inch Could Be So Problematic?!
Wow!glendalais wrote:As you may or may not know, I'm a Canadian living in the US.
With that comes certain duties that need to be undertaken every so often. Voting in Federal Elections by mail. Lashing out at friends and neighbours after certain Olympic embarassments (don't get me started :p :) . And really importantly, maintaining a proper Passport.
That's what's been causing me so much headache recently. Time has come for me to apply for a new Canadian Passport. There are certain things that are different about this process compared to applying for an American Passport.
You have to have a guarantor to vouch for your identity. Barring that, you have to drag your entire application over to a Notary Public.
You have to submit references.
And most differently, the picture sizes are different. U.S. Passport Photos are 2 in. by 2 in.. Canadian Photos are 50 mm. by 70 mm., or 2 in. by 2¾ in.. On top of that, it has to be a professional portrait (no taking one in your bathroom) and the photographer has to put their contact information on the back (hence why it's taller).
This has been the procedure for years, and if I were in Canada, would be taken care of in a relative heartbeat.
That's the problem. I'm not.
I've been driving across Central Florida like a madman trying to find someone willing to do this for me. Place after place, people seem to be adverse to the idea of leaving ¾ths of an inch on the photo. I broach the subject, and they seem to freeze up and give me this look like I have two heads. Indeed, one lovely man out in Altamonte Springs barely let me get the words 'Canadian' and 'Passport' out before saying no.
Ugh! :mad:
last time I got my two passports update, I went to a AAA auto club office...perhaps they would be a source of knowing who could do that for you? or a call to the nearest embassy? found this for flordia
http://www.voyage.gc.ca/contact/offices ... ?id=308006
:pirateflaARRRRRRR YA DOIN'?
-
- Seasoned Pro
- Posts: 947
- Joined: Thu May 06, 2004 11:17 am
- Location: New Jersey
Re: Who Knew ¾th of an Inch Could Be So Problematic?!
What about a post office?
IIRC, most county seats (IE: the town or place where the county business is done, usually the main court house is nearby) do passports.
IIRC, most county seats (IE: the town or place where the county business is done, usually the main court house is nearby) do passports.
Main Streeter wrote:It's always my fault.
-
- Permanent Fixture
- Posts: 5734
- Joined: Thu Feb 15, 2007 7:19 pm
- Location: Vancouver, Washington
Re: Who Knew ¾th of an Inch Could Be So Problematic?!
What is the definition of "professional" and what information needs to be on the back?
My opinions are mine and mine only. If my opinions are the opinion of others who happen to share whatever my crazy views may be, then fine, but it's not because I represent them in having my opinions. Got it?
-
- Permanent Fixture
- Posts: 4844
- Joined: Mon Jan 30, 2006 9:16 pm
Re: Who Knew ¾th of an Inch Could Be So Problematic?!
Sounds like someone is lining someones pockets. 

Beer....The reason I get up every,,,,,,,,,,,,,,,afternoon.
-
- Seasoned Pro
- Posts: 824
- Joined: Sat Nov 17, 2007 5:26 pm
- Location: Orlando, Fla.
Re: Who Knew ¾th of an Inch Could Be So Problematic?!
I shot off an e-mail to the Consulate General for advice a few days ago. They haven't gotten back to me just yet.GRUMPY PIRATE wrote:Wow!
last time I got my two passports update, I went to a AAA auto club office...perhaps they would be a source of knowing who could do that for you? or a call to the nearest embassy? found this for flordia
http://www.voyage.gc.ca/contact/offices ... ?id=308006
I'm not so sure that they I could apply for a Canadian Passport at a US Passport Acceptance facility.leftcoaster wrote:What about a post office?
IIRC, most county seats (IE: the town or place where the county business is done, usually the main court house is nearby) do passports.
On top of that, their photos probably wouldn't be accepted (see below).
According to Passport Canada, they have to be a commercial photo studio or photographer (i.e. one that is set up as a business to take photographs).Big Wallaby wrote:What is the definition of "professional" and what information needs to be on the back?
They would need to write their Studio or Personal Name and Address on the back, along with the date the photo was taken, leaving enough room for the Guarantor to provide the legal proclamations required.
It ends up looking like this:

On the bright side, I've found a place in Downtown Orlando that seems to be willing to do this for me. I'm heading there tomorrow to see what they say, and hopefully it all works out.
- hobie16
- Permanent Fixture
- Posts: 10546
- Joined: Fri Nov 05, 2004 4:45 pm
- Park: DLR
- Department: Fruity Drink Land
- Position: Mai Tai Face Plant
- Location: 717 Miles NNW Of DLR
Re: Who Knew ¾th of an Inch Could Be So Problematic?!
Phony a name up. Something like Joe Baggadonuts Fine Photography & Cholesterol Bombs.
Remember, all professional means is you're getting paid to do something. Pay some kid with a camera and Photoshop to do the deal. Shoot the pic, resize in PS and print it to good paper.
Remember, all professional means is you're getting paid to do something. Pay some kid with a camera and Photoshop to do the deal. Shoot the pic, resize in PS and print it to good paper.

Don't be fooled by appearances. In Hawaii, some of the most powerful people look like bums and stuntmen.
--- Matt King
Stay low and run in a zigzag pattern.
-
- Practically Lives Here
- Posts: 1170
- Joined: Sun Feb 17, 2008 1:30 pm
- Park: Canadas Top
- Department: Concert Hall!
- Position: Making Lights Move!
- Location: The Great White North eh!
Re: Who Knew ¾th of an Inch Could Be So Problematic?!
They actually follow up on the studio info from time to time, verifying the adddress and such with a phone call or a check online. If they found it was fraudulant, they might find reason to deny the passport for "bureaucratic" reasons.hobie16 wrote:Phony a name up. Something like Joe Baggadonuts Fine Photography & Cholesterol Bombs.
Remember, all professional means is you're getting paid to do something. Pay some kid with a camera and Photoshop to do the deal. Shoot the pic, resize in PS and print it to good paper.
You need to find a Canadian photog who just happen to be visiting Orlando on holidays. I suggest contacting Christine at Fairytale Dreams and Destinations, http://www.fairytaledestinations.com/index.php the only Canadian Disney specialist, and find out if she is sending down any clients who happen to be pro photographers. They could do the shot for you at WDW.
-
- In our Memory
- Posts: 326
- Joined: Mon Nov 08, 2004 7:06 am
- Location: The far side of Endor...
Re: Who Knew ¾th of an Inch Could Be So Problematic?!
You might want to try Harmon Photo while you're downtown. They are on Princeton, right on the lake, there is also another photography studio on Princeton, before you get there, it's across from Theater Downtown.
Good Luck!
Good Luck!
I'm not a tourist cause I work there...